Payment & Shipping Terms:
DiSTs are rugged and reliable pocket-sized testers that offer quick and accurate readings of conductivity or TDS.
The Hanna Instruments HI 98303 DiST 3 1999 µS/cm EC Tester with 1 µS/cm resolution is widely used for monitoring EC/TDS in drinking water, water conditioning, reverse osmosis, cooling towers, wastewater, laboratories, agriculture, aquaculture and aquariums, hydroponics and the printing industry.
The Hanna Instruments HI98303 DiST tester features an amperometric graphite electrode that provides better repeatability in measurements since they do not oxidize. An amperometric measurement of TDS is based on Ohms Law, I = V/R where R depends on the distance between two pins and their surface. Oxidation changes both the distance and surface which will affect accuracy. The DiSTs non-oxidizing graphite pins are able to provide an optimal surface for accurate, dependable results.
When calibration is necessary, simply submerge the electrode tip into calibration solution and adjust the trimmer on the side of the tester.
|Conductivity Range||1999 µS/cm|
|Conductivity Resolution||1 µS/cm|
|Conductivity Accuracy||±2% F.S.|
|Calibration||manual, one point|
|Temperature Compensation||automatic from 0 to 50°C (32 to 122°F)|
|Calibration Solution||HI70031: 1413 mS/cm|
|Battery Type / Life||1.5V (4) / approximately 200 hours of continuous use|
|Environment||0 to 50°C (32 to 122°F); RH max 95% non-condensing|
|Dimensions||175 x 41 x 23 mm (6.9 x 1.6 x 0.9’’)|
|Weight||95 g (3.4 oz.)|
|Ordering Information||HI98301 (DiST®1), HI98302 (DiST®2), HI98303 (DiST®3) and HI98304 (DiST®4) are supplied with protective cap, screwdriver, batteries and instructions.|